Marquee Rise Above
[vc_row][vc_column][vc_column_text] Marquee Rise Above [/vc_column_text][/vc_column][/vc_row]
16Jul
Pop Up Canopy
[vc_row][vc_column][vc_column_text] Portable canopies that literally set up in seconds. Sizes range from 5' x 5' up to 10' x 20'. Larsens, Inc. is an authorized KD Kanopy distributor. [/vc_column_text][/vc_column][/vc_row]
09Jul
Zipper components
[vc_row][vc_column][vc_column_text] The four major components of a separating zipper are: box pin teeth slider A separating zipper does just what its' name says.. it separates like the zipper on a jacket. To engage the zipper start with the slider at the very bottom. Insert the "pin" through the slider and into the "box". Pull the slider up the zipper "teeth"...
09Jul
Roof End Vent
[vc_row][vc_column][vc_column_text] A roof end vent is a mesh insert with a roll-up cover. This vent provides ventilation for the canopy. [/vc_column_text][/vc_column][/vc_row]
09Jul
Spider
[vc_row][vc_column][vc_column_text] The spider connector or coupling for rafters, spacers, and vertical support poles. [/vc_column_text][/vc_column][/vc_row]
09Jul
Spring pole
[vc_row][vc_column][vc_column_text] The spring pole acts as an anchoring post for the side skirts and ground pole. It attaches to a bracket on the trailer at each end of the canopy. The foot base is spring loaded so it rides up and down depending on the weight in the trailer and the terrain. [/vc_column_text][/vc_column][/vc_row]
09Jul
Storefront
[vc_row][vc_column][vc_column_text] A Storefront style roof is available on fully enclosed canopies. The rafters create a peak which gives more headroom and creates the illusion of more space. The removable triangular shaped storefront allows for better graphics visibility from the ground than a standard slope roof. [/vc_column_text][/vc_column][/vc_row]
09Jul
Extension Wrap
[vc_row][vc_column][vc_column_text] A standard extension follows the line of the trailer (curbside or roadside). A wrap "turns the corner" around the front or rear of the trailer. It terminates on the opposite side. The photo shows a "rear extension wrap" turning the corner on the lift gate end of a semi. [/vc_column_text][/vc_column][/vc_row]
09Jul
Horizontal Brace
[vc_row][vc_column][vc_column_text] Used on cantilevered canopy frames, a horizontal brace stabilizes the rafter with a return to the trailer wall. [/vc_column_text][/vc_column][/vc_row]
09Jul
Half Height Skirt Poles with Adjustable Collars
[vc_row][vc_column][vc_column_text] Horizontal aluminum poles used to hang half height skirts. They also serve as supporting "window sills" for zip down windows. Height is adjustable. [/vc_column_text][/vc_column][/vc_row]