09JulJuly 9, 2019

Rise Above Canopy

The frame rises above the trailer roof line before sloping to outer eave. Used when trailer is too short to provide proper slope for watershed. Available on Cantilevered and Fully Enclosed canopies.

RAwning, Canopies, Canopy, Frames, Motorsport Awning, Rise AboveLike: 0

09JulJuly 9, 2019

Mounting Hardware

Hardware that is attached to the trailer for canopy and frame installation.

MAwning Rail, C-Track, Frames, Mounting Hardware, Prefeeder, Rafter RingLike: 0

09JulJuly 9, 2019

Goose-neck Trailer Set-up

Even short trailers such as goose-necks can accommodate our canopies. You simply add a "rise above" to create an elevated rear eave. The photo shows the "open frame" method (left end) and "tilt-up panel" method (right side).

GAwning, Canopy, Frame, Frames, Gooseneck Trailer, Motorsport Awning, StylesLike: 0

09JulJuly 9, 2019

Quick Pin

A locking pin inserted into holes in the frame to join two pieces together.

QFrame, Frames, locking pin, Quick PinLike: 0

09JulJuly 9, 2019

Length

The canopy length is the measurement along the trailer. Typically the length at the outer eave (away from the trailer) is the same as the length at the trailer.

LCanopies, Canopy, FramesLike: 0

09JulJuly 9, 2019

Spinnaker End

A spinnaker end is attached to the trailer end of each rafter. The spring loaded hook is cocked using a cable that runs thru the rafter. The hook snaps into the rafter ring securing the rafter to the trailer.

SFrames, Mounting, Rafter, Roof, Spinnaker EndLike: 0

09JulJuly 9, 2019

Awning Rail

Also called "C" channel, "C" track or trailer track. Holds the bolt rope or keder and keeps the canopy attached to the trailer.

AAccessories, Awning, Awning Rail, Bolt Rope, C-Track, Canopy, Frames, Install, Mounting, TrailerLike: 0

09JulJuly 9, 2019

Wired Rafters

Frame rafters can be wired internally for 110v or 220v receptacles. Pneumatic tubing can also be threaded through the rafters to deliver compressed air or other gasses.

WFrames, RafterLike: 0

09JulJuly 9, 2019

NHRA Racing Canopy

The NHRA style canopy is another term for "cantilevered" or "suspended". The canopy is supported entirely by the trailer with no vertical poles. These are very popular with drag race teams since they allow access for tall & long dragsters. They are also popular with boat racers and vendors. The outer eave is typically...

NCanopies, Canopy, Cantilevered, Frames, NHRA, Racing, StylesLike: 0

09JulJuly 9, 2019

Chuckwagon Style Entry

Chuck wagon Style Entry

The "Chuck wagon" style portico on his hospitality set-up allows access to the curbside, roadside or both canopies. Its distinctive "hooped" fascia provides an ideal space for branding.

Cdoors, Frames, StylesLike: 0